Creature From the Black Lagoon by Bally (1992)

BUY CREATURE FROM THE BLACK LAGOON PINBALL MACHINE ONLINE
Creature From the Black Lagoon by Bally is completely restored to better than new condition.  Pristine cabinets, backglass, and playfields are the result of over 100 hours of detailed craftsmanship and new, high-quality materials.  These highly collectable machines looks like a new machine coming off the assembly line. They also have clear-coated playfields that protect the playfield from wear and will make your showpiece last a lifetime.
High End Restoration Process:

Remove everything from Playfield and Cabinet
Tumble and polish all hardware
Sand off old cabinet artwork to bare wood
Bondo and repair cabinet (several times)
Tape off inside bottom of cabinet and paint whole cabinet
Prep cabinet surface for decals
Install decals and trim off excess
Set cabinet up on legs for reassembly
Install brand new ground braid
Disassemble power box and transformer, clean, paint and reassemble
Install new button(s), flipper button switches, new coindoor, new siderails, new lockdown bar receiver, new head head hinges, new bolts/nuts
Install head on cabinet
Disassemble backbox light board, clean harness, paint light board, and reassembled
Disassembled board panel, paint, rebuild and clean all boards, and reassemble
Disassemble speaker panel, clean/paint, install new DMD, new speaker panel plastic, reinstall in head.
Install cabinet harness (cleaned)

Playfield Work:

Install all new tnuts in new/clearcoated playfield by hand
Paint and install wooden siderails
Install all new pop bumper parts, playfield support rails, playfield hangers
Disassemble all playfield assemblies, tumble all brackets and hardware, clean all coils and install new coil wrappers, brand new plungers, coil sleeves, etc.
Install completed assemblies on playfield
Install tumbled/polished posts, rubbers
Clean and regrain all ball guides
Clean all lamp boards and install LED’s
Disassemble all playfield plastics and install new plastic set
Disassemble ramp(s), clean harnesses, polish hardware, replace switches, reassemble on brand new ramp
Clean all wiring harnesses by hand, let dry, reinstall on playfield
Reinstall playfield in cabinet and make any necessary adjustments